Prepare for the cold with firewood for fire – Blog

We like it or not, winter is getting closer quickly and we must make the preparations necessary to face it correctly. If your heating system works with firewood, this article is for you. Find out what you will have to do in the near future to prepare your burning wood for the stove, the fireplace or the boiler.

As we chose firewood

The first step to get the reserve is to choose the right wood. Not all types of firewood are ideal for turning on the fire of the stove or for the wooden boiler. Below are some properties that you must have for good combustion and to guarantee sufficient heat.

• • Even if you have to burn it, the burning wood that we use to warm up must be healthy, without rotting parts

• • The wood suitable for efficient combustion has not been in contact with humidity during the conservation period and therefore shows no signs of humidity

• • The wood must be of a difficult nature, this type of wood is the most efficient, it has practically a low humidity, a greater calorie value and a longer combustion time – some examples of wood of this nature are beech trees, bold, carp

• • In the same way we avoid the wood with a low calorification power such as shooting, willow or poplar.

• • There is the right size for everything, including firewood; Its size of the diameter must not exceed 50 cm.

At the same time, we must take into account that when we turn on a fire to heat our home, we should not try to burn house waste. If we do it, in addition to burning burning wood, various chemicals will be released to smoke. And we will swallow those harmful substances.

Leave and cut the wood

The first and most important thing to know when cutting the burning wood is the size to which it should be cut. In general, fireplaces or boilers are designed for firewood with a size of 30-50 centimeters. We must never try to force the burning wood of a larger size of the size of the stove and we should not even try to burn them with the open door.

The dimension also matters when they divide them; Small diameter wood is the easiest to be divided.

The tools used to cut wood have evolved a lot over the centuries in which man used heat to obtain heat. From the simple ax that we have used with difficulty in the past, now we can benefit from an impressive range of tools to divide and cut wood. This modern team has a series of advantages such as:

• • Facilitating the cutting process: through some repetitive movements the desired result is obtained in a simple and safe way.

• • Speed: Whatever the chainsaw or trunks we use, we will cut the wood in much shorter times thanks to the power and precision of these modern technologies.

• • Higher wood volume: by reducing cutting times we can obtain a greater number of trunks that work efficiently with these tools

• • Low risk for accidents: although modern tools presented some risks, with correct management, the work becomes safe and precise.

How do we keep wood during the winter

Before talking about the storage conditions, remember that the wood must be left to dry after cutting. In this way it acquires the characteristics necessary for combustion.

The firewood should be stored under certain conditions to dry correctly and can be used as long as possible. The essential factor that we must take into consideration during conservation is humidity. More specifically, attention must be paid that the storage space is protected from humidity. Only in this way will wood last as long as possible, without rot.

Another important factor in the conservation of burning wood is ventilation. The space in which we look should allow the penetration of the air. At the same time, when we put it, we have to leave space between the trees so that the air can circulate with each other and dry.

Perhaps the most common place to preserve firewood is the forest, an effective solution for those who have enough space. These cabins can be built by hand or we can buy them already made. For those who do not have a warehouse, there are alternative solutions, such as placing the wood on the shelves or the improvised support from pallets or other materials. This shelf can be placed in the garden or home, but the best way to dry the wood is outdoors.

Regardless of the storage method we choose, we must not forget two fundamental rules: protect humidity wood and guarantee ventilation. From our point of view, wood is the most comfortable and practical solution to preserve firewood. What solutions for wood storage have you adopted?